Re: Trouble in Portola??
Author: E9a
Date: 04-22-2015 - 06:02

Having read all this stuff on both sides and talking to some of the parties, I drew my own conclusions.

I agree the present leadership is pretty well entrenched. But I also know they have steered the place though some tough times and got it back on a secure footing financially. I do not believe for a moment they have been selling equipment to "pay bills." They have sold some stuff that was irrelevant to the WP collection, made some trades, and scrapped some stuff nobody else was willing to take. They've been up front about it, IMO. Most of what has left went to good and/or more appropriate homes, such as the MILW U-Boat.

As for how the place looks, anybody who wants it to look better is welcome to join and come up and help. During work weeks, people show up from over 1,000 miles away, at their own personal expense, willing to lend a hand. A lot more than the dissidents can say.

I think this boils down to ego issues more than anything. Now that the place is pretty stable it looks like some folks have an envy problem and also think they should be individually consulted when decisions are made. They were largely nowhere to be seen when the wolf was at the door. At least one wants special privileges, and another wants his hands on the purse strings. Another is virtually unknown, and there are others behind the scenes stirring the pot.

IMO, it's typical foamer club soap opera where those who can't get their way run to the nearest lawyer and whine rather than do anything productive.



Subject Written By Date/Time (PST)
  Trouble in Portola?? Roddy 04-21-2015 - 08:55
  Re: Trouble in Portola?? FRRS Life Member 04-21-2015 - 13:33
  Re: Trouble in Portola?? Ken Shattock (KRK) 04-21-2015 - 14:25
  Re: Trouble in Portola?? Cprr 04-21-2015 - 14:26
  Re: Trouble in Portola?? Roddy 04-21-2015 - 16:45
  Marin History Museum Just Went Belly Up NWPfanora 04-21-2015 - 17:49
  Re: Marin History Museum Just Went Belly Up Al Stangenberger 04-21-2015 - 19:00
  Re: Trouble in Portola?? David Dewey 04-21-2015 - 21:37
  How much difference would changing the board make Disco Dave 04-21-2015 - 19:06
  Re: Trouble in Portola?? Gricer 04-21-2015 - 22:58
  Re: Trouble in Portola?? Where is the Proof? 04-22-2015 - 00:31
  Re: Trouble in Portola?? The Odd Duck 04-22-2015 - 01:10
  Re: Trouble in Portola?? Chub 04-22-2015 - 05:49
  Re: Trouble in Portola?? E9a 04-22-2015 - 06:02
  Re: Trouble in Portola?? Rapon 04-22-2015 - 06:25
  Re: Trouble in Portola?? Disgusted member 04-22-2015 - 09:05
  Re: Trouble in Portola?? Gricer 04-22-2015 - 15:09
  Re: Trouble in Portola?? KRK 04-22-2015 - 15:32
  Re: Trouble in Portola?? Gricer 04-22-2015 - 20:28
  Re: Trouble in Portola?? Mark 04-22-2015 - 15:30
  Re: Trouble in Portola?? FRRS Life Member 04-23-2015 - 08:43
  Not unique SP5103 04-22-2015 - 16:04
  Re: Not unique E9a 04-22-2015 - 22:10
  Re: Portola's issues? SP5103 04-23-2015 - 12:36
  Re: Portola's issues? FRRS President 04-23-2015 - 12:49
  Re: Portola's issues? Wes Porter 04-23-2015 - 14:29
  Re: Portola's issues? KRK 04-24-2015 - 08:44
  Re: Portola's issues? E9a 04-23-2015 - 16:16
  Re: Portola's issues? David Dewey 04-24-2015 - 00:46
  Re: Portola's issues? E9a 04-24-2015 - 07:41
  Re: Not unique SP 4451 04-23-2015 - 19:56
  Re: Not unique E9a 04-23-2015 - 20:07
  Re: Not unique SP 4451 04-23-2015 - 21:38
  Re: Not unique E=MC2 04-24-2015 - 07:44
  Re: Not unique Ratbmilcon 04-24-2015 - 09:17
  Re: Not unique E9a 04-24-2015 - 09:22
  Re: Not unique David Epling 04-24-2015 - 12:08
  Re: Not unique Outsider 04-24-2015 - 12:35
  In fairness to both sides... Steve 04-24-2015 - 12:59
  Re: In fairness to both sides... FRRS life member 04-24-2015 - 13:53
  Re: In fairness to both sides... E9a 04-24-2015 - 18:00
  Re: In fairness to both sides... z 04-24-2015 - 18:39
  Re: In fairness to both sides... Tom Carter 04-24-2015 - 23:00
  Re: In fairness to both sides... Steve 04-24-2015 - 23:18
  Re: In fairness to both sides... SP5103 04-25-2015 - 09:45
  Re: In fairness to both sides... Tom Carter 04-25-2015 - 12:19
  Re: In fairness to both sides... cz-14 04-25-2015 - 16:37
  Re: In fairness to both sides... E9a 04-25-2015 - 16:56
  Re: In fairness to both sides... cz-14 04-25-2015 - 17:04
  "Steve" David Epling 04-25-2015 - 23:48
  Re: "Steve" Steve 04-26-2015 - 00:45
  Re: "Steve" e 04-26-2015 - 15:33
  Missing Huff SP 4451 04-25-2015 - 19:29
  Missing the Cad SP 4404 04-25-2015 - 20:37
  Re: Missing the Cad SP 4451 04-25-2015 - 22:21
  Re: Missing the Cad Interchange 04-26-2015 - 00:02
  Re: Missing the Cad Peter D. 06-02-2015 - 10:34


Go to: Message ListSearch
Subject: 
Your Name: 
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically.
  *******   **     **  ********  **     **  ********  
 **     **  **     **  **        **     **  **     ** 
        **  **     **  **        **     **  **     ** 
  *******   **     **  ******    **     **  ********  
        **   **   **   **         **   **   **        
 **     **    ** **    **          ** **    **        
  *******      ***     ********     ***     **        
This message board is maintained by:Altamont Press
You can send us an email at altamontpress1@gmail.com