Re: UP 4014 in Evanston
Author: Hot Water
Date: 04-06-2021 - 08:24

Burgler Wrote:
-------------------------------------------------------
> They addressed this after this first trip.


Yes, they sure did. When they first sent the piston rods out to be ground & finished, someone overlooked the stroke dimension, and how far in & out the pistons go into the cylinders. Thus, the surface of the piston rods was not sufficiently ground & finished throughout the full length of the stroke, and the unfinished areas on the piston rods quickly ate up the rod packing. Upon returning to Cheyenne, the piston rods were sent out to be reground & finished throughout their full stroke.



Subject Written By Date/Time (PST)
  UP 4014 in Evanston Film at 11 04-05-2021 - 22:28
  Re: UP 4014 in Evanston CCdW 04-06-2021 - 06:15
  Re: UP 4014 in Evanston Burgler 04-06-2021 - 06:30
  Re: UP 4014 in Evanston Film at 11 04-06-2021 - 07:20
  Re: UP 4014 in Evanston Hot Water 04-06-2021 - 08:24
  Re: UP 4014 in Evanston David Dumpling 04-06-2021 - 08:11
  Re: UP 4014 in Evanston PootyTang 04-06-2021 - 11:13
  Re: UP 4014 in Evanston 261 fan 04-09-2021 - 03:48
  Re: UP 4014 in Evanston Paul 04-09-2021 - 19:36
  Re: UP 4014 in Evanston Boy Big 04-06-2021 - 08:48
  Re: UP 4014 in Evanston An Observer 04-06-2021 - 10:45
  Re: UP 4014 in Evanston Boy Big 04-06-2021 - 15:53
  Re: UP 4014 in Evanston Gevos_4ever 04-07-2021 - 20:52


Go to: Message ListSearch
Subject: 
Your Name: 
Spam prevention:
Please enter the code that you see below in the input field.
 ********   ********   **     **  **     **  ********  
 **     **  **     **  **     **  ***   ***  **     ** 
 **     **  **     **  **     **  **** ****  **     ** 
 ********   ********   *********  ** *** **  **     ** 
 **     **  **     **  **     **  **     **  **     ** 
 **     **  **     **  **     **  **     **  **     ** 
 ********   ********   **     **  **     **  ********  
This message board is maintained by:
Altamont Press Publishing Company