Re: WP Oakland roundhouse - where?
Author: OPRRMS
Date: 12-20-2009 - 14:03

Dragoman Wrote:
-------------------------------------------------------

> For the benefit of some of us (only-slightly)
> younger Old Farts -- where was the WP roundhouse?

It was located west of where Aleline Street and Middle Harbor Road intersect, west of the Schnitzer Steel property. The roundhouse faced west.

> Any remnants left?

Not really. The remains were torn down after WP moved locomotive servicing down into the Oakland Yard, west of where the new yard office was (that building is still there but was sold off several years ago). The area was then paved over, new tracks installed, and used as a Chrysler unloading facility. Then a few years ago those tracks were removed and the area repaved for container storage.

After the roundhouse was closed the balloon track that ran next to it was used to turn locomotives. Eventually most of the balloon was removed and the remaining portion used for the west leg and tail of the current wye. This wye is the only WP trackage remaining in Oakland west of the end of the old WP First Sub (now UP's Oakland Sub) that ends just west of 50th Avenue in East Oakland.



Subject Written By Date/Time (PST)
  WP Oakland roundhouse Photobob 12-19-2009 - 15:48
  Re: WP Oakland roundhouse Henry Miller 12-19-2009 - 16:12
  Re: WP Oakland roundhouse Photobob 12-19-2009 - 16:16
  Re: WP Oakland roundhouse RICK DUNSMUIR 12-19-2009 - 18:21
  Re: WP Oakland roundhouse Drew Jacksich 12-19-2009 - 20:44
  Re: WP Oakland roundhouse Tony Johnson 12-19-2009 - 21:01
  Re: WP Oakland roundhouse - where? Dragoman 12-20-2009 - 10:18
  Re: WP Oakland roundhouse - where? OPRRMS 12-20-2009 - 14:03
  Re: WP Oakland roundhouse - where? Henry Miller 12-20-2009 - 14:14
  Re: WP Oakland roundhouse - where? OPRRMS 12-20-2009 - 15:12
  Re: WP Oakland roundhouse - where? Dragoman 12-21-2009 - 10:06
  Re: WP Oakland roundhouse - where? OPRRMS 12-21-2009 - 13:08


Go to: Message ListSearch
Subject: 
Your Name: 
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically.
 **     **   ******    ********   ********   ********  
  **   **   **    **   **     **  **     **  **     ** 
   ** **    **         **     **  **     **  **     ** 
    ***     **   ****  ********   **     **  ********  
   ** **    **    **   **         **     **  **     ** 
  **   **   **    **   **         **     **  **     ** 
 **     **   ******    **         ********   ********  
This message board is maintained by:Altamont Press
You can send us an email at altamontpress1@gmail.com