Re: GCR?4960
Author: Mike Lepker
Date: 08-26-2008 - 23:03

I would guess that the jobs, or job, would go on duty at Getz. Both frogs are still removed off of main one into Mconnico, which is the 3 yard track where the 2 geeps were sitting. That is the only way into or out of the plant. Interestingly enough, when the plant was built, the access track had to be built east of a graveyard. It is hard to see, but there is an area where the earth is unchanged surrounded by a fence to protect the gravesites. It is halfway between the plant and the yard at Mconnico. I have no history on the gravesite or who is buried there. From main 2 looking down You can see the area if You know where to look. I ran waybills on those two geeps as they were being moved but I'll have to look for them to remember where they went. I often thought that one would look nice restored (with tall short hood) and painted in zebrastripe connected to the two reefers and caboose in Needles.



Subject Written By Date/Time (PST)
  Nucor To Start Production At Idled Arizona Mill Tom Burns 08-26-2008 - 08:10
  Re: Nucor To Start Production At Idled Arizona Mill Tom Moungovan 08-26-2008 - 08:41
  Re: Nucor To Start Production At Idled Arizona Mill Rich Hunn 08-26-2008 - 15:12
  Re: Nucor To Start Production At Idled Arizona Mill Tom Burns 08-27-2008 - 14:27
  Re: Nucor To Start Production At Idled Arizona Mill GCRY_4960 08-26-2008 - 16:38
  Re: Nucor To Start Production At Idled Arizona Mill Rich Hunn 08-26-2008 - 16:46
  Re: Nucor To Start Production At Idled Arizona Mill Tom Moungovan 08-26-2008 - 20:08
  Re: Nucor To Start Production At Idled Arizona Mill GCRY_4960 08-26-2008 - 21:21
  Re: GCR?4960 Tom Moungovan 08-26-2008 - 22:07
  Re: GCR?4960 Mike Lepker 08-26-2008 - 23:03
  Re: GCR?4960 Rich Hunn 08-27-2008 - 16:02


Go to: Message ListSearch
Subject: 
Your Name: 
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically.
 **    **   ******    ********  **    **  **     ** 
 ***   **  **    **   **    **   **  **   **     ** 
 ****  **  **             **      ****    **     ** 
 ** ** **  **   ****     **        **     **     ** 
 **  ****  **    **     **         **     **     ** 
 **   ***  **    **     **         **     **     ** 
 **    **   ******      **         **      *******  
This message board is maintained by:Altamont Press
You can send us an email at altamontpress1@gmail.com