Re: Bob 2 question- I think that;s why its; expensive...
Author: ron
Date: 09-09-2019 - 19:27

If I ubderstand correctly, Metrolink installed a switch, but PUC requires a PTC enabled control point?

OPRRMS Wrote:
-------------------------------------------------------
> ron Wrote:
> --------------------------------------------------
> -----
> > Bob,
> >
> > So there is a need for a Control Point on the
> > "Metrolink side"?
>
> Not if it involves a hand-operated switch or
> crossover.



Subject Written By Date/Time (PST)
  Connection disconnected Ghost of Disconnect 09-07-2019 - 23:33
  Re: Connection disconnected 600vdc 09-08-2019 - 00:34
  Re: Connection disconnected Cprr 09-08-2019 - 11:18
  Re: Connection disconnected IIRC the drawings I recall showed the connection and the extension to opposite the depot. BOB2 09-08-2019 - 12:40
  Re: Connection disconnected IIRC the drawings I recall showed the connection and the extension to opposite the depot. OET WILL RISE AGAIN 09-08-2019 - 15:01
  Re: I haven't lost it all yet... Although it seems to have taken a while..... BOB2 09-08-2019 - 16:11
  Re: Has this been a recent change on the web site?o have taken a while..... BOB2 09-08-2019 - 16:19
  Re: Has this been a recent change on the web site?o have taken a while..... Bill 09-09-2019 - 08:35
  Re: Has this been a recent change on the web site?o have taken a while..... SCRM dba OERM 09-09-2019 - 10:20
  Re: Has this been a recent change on the web site?o have taken a while..... Bill 09-09-2019 - 10:43
  Bob 2 question Cprr 09-09-2019 - 11:19
  Re: Bob 2 question- I think that;s why its; expensive... BOB2 09-09-2019 - 12:50
  Re: Bob 2 question- I think that;s why its; expensive... ron 09-09-2019 - 13:49
  Re: Bob 2 question- I think that;s why its; expensive... OPRRMS 09-09-2019 - 14:28
  Re: Bob 2 question- I think that;s why its; expensive... ron 09-09-2019 - 19:27
  Re: Bob 2 question- I think that;s why its; expensive... OPRRMS 09-09-2019 - 19:49
  Re: Bob 2 question- I think that;s why its; expensive... around and around 09-11-2019 - 08:39
  Re: I haven't lost it all yet... OET LYNWOODY 09-08-2019 - 20:19
  Re: Connection disconnected IIRC the drawings I recall showed the connection and the extension to opposite the depot. curiv4xous... 09-08-2019 - 20:13
  Re: Connection disconnected IIRC the drawings I recall showed the connection and the extension to opposite the depot. Melvin 09-08-2019 - 20:39
  Re: Connection disconnected IIRC the drawings I recall showed the connection and the extension to opposite the depot. ATSF108 09-10-2019 - 22:27
  Re: Connection disconnected RCTC Voter 09-10-2019 - 20:36
  Re: Connection disconnected FOGHORN LEGHORN 09-10-2019 - 22:39


Go to: Message ListSearch
Subject: 
Your Name: 
Spam prevention:
Please enter the code that you see below in the input field.
 **         *******   **    **  **     **  **     ** 
 **        **     **  ***   **  **     **  **     ** 
 **        **         ****  **  **     **  **     ** 
 **        ********   ** ** **  **     **  **     ** 
 **        **     **  **  ****  **     **   **   **  
 **        **     **  **   ***  **     **    ** **   
 ********   *******   **    **   *******      ***    
This message board is maintained by:
Altamont Press Publishing Company