Go to: Message List•New Topic•Search
Re: Loram Rail Grinder
Author: Graham Buxton
Date: 09-29-2013 - 11:20

You may be interested in reading this document on grinding switches. Switches are not the same as regular linear rail, of course, but it may still be useful.

Quote:
Speno
Precise placing of the grinding motors is achieved through the use of special stones of 180 mm diameter and a height of 105 mm. New stone materials permit an effective grinding time of over four hours and there is no need to change grinding stones during a shift. Specially shaped stones - only 27mm thick - are dedicated to working at the gauge corner to assure complete profiling.

[www.speno.ch]

Navigate: Previous Message•Next Message
Options: Reply To This Message•Quote This Message


Subject Written By Date/Time (PST)
  Loram Rail Grinder SP fan 09-28-2013 - 21:30
  Re: Loram Rail Grinder Trackwalker 09-28-2013 - 21:57
  Re: Loram Rail Grinder Graham Buxton 09-29-2013 - 11:20
  Re: Loram Rail Grinder Rich Hunn 09-29-2013 - 12:44


Go to: Message List•Search
Subject: 
Your Name: 
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically.
 ********  **     **   *******   **    **   ******   
    **     **     **  **     **  ***   **  **    **  
    **     **     **         **  ****  **  **        
    **     **     **   *******   ** ** **  **   **** 
    **     **     **         **  **  ****  **    **  
    **     **     **  **     **  **   ***  **    **  
    **      *******    *******   **    **   ******
This message board is maintained by:Altamont Press
You can send us an email at altamontpress1@gmail.com