Re: Track circuits - connectivity
Author: Ken Shattock (KRK)
Date: 10-15-2016 - 18:42
mook Wrote:
-------------------------------------------------------
> SMART vehicles are not LRVs - they are modern
> equivalents of RDC cars, and afaik do have solid
> axles. Failure to shunt track circuits properly
> may be related to something else.
>
> Older-style high-floor LRVs usually have solid
> axles, and generally shunt track circuits
> adequately. Low-floor LRVs and streetcars can have
> several configurations, including one where all
> the wheels are on stub axles; those may require
> special internal wiring to simulate solid axles
> for shunting purposes. In principle, they should
> work because the wheels are still completing the
> circuit through the car body for propulsion power
> and should therefore have electrical continuity
> between all the wheels; however, for low voltages
> like the signal circuits there may be too much
> resistance through all the body connections to
> allow enough current to flow.
>
> Would I be correct in thinking that "shunt" in
> this context is essentially a short circuit across
> the track, which pulls down the battery voltage
> allowing the relay to drop?
Mook wrote: "Would I be correct in thinking that "shunt" in this context is essentially a short circuit across the track, which pulls down the battery voltage allowing the relay to drop?"
You are absolutely correct, Mook...
Years ago, with the railway system on the Bay Bridge, it got to be 'really' interesting because when trains are operated with DC Voltage, you must use AC track circuits, and then the fun begins...
KRK